Hello
Can I get opinions on "Must" have tools to
rebuild a 200 4r tranny?
I have the parts, manual
thanks

Rick,
Cant help with needed tools but check this guy rebuilding his.
http://www.chevytalk.org/fusionbb/showtopic.php?tid/145853/tp/1/
Might save you from dropping the tranny 3 or 4 times :D .

Yes, there is a great book written on the 200 4R:
http://www.ckperformance.com/resources/GM2004RTECHNICALMANUAL.html
This book tells all.

Thomas

This is good DIY method.

http://www.gnttype.org/techarea/transmission/200rebld.html

And...
unless you have a GN servo plan on either buying one or a Super Servo.
if it doesn't have at least a GN servo the shift feel is lame/soft IMHO and experience.

And if you have more 200-4r ?? go over here.

http://www.turbobuick.com/forums/transmission-talk/

Thanks!! Guys :)
I have the performance kit from TCI
Gran National servo?
Performance "Cover" Form Bowtie
The manual lists alot of "pullers"
Have the snap pliers
Looks straight forward

I just rebuilt my 700 r4, I was able to make all of the pullers I needed. I did have to borrow a teflon bushing resizer.