On my right quarter panel, the wheel well trim seems lower on the back part than the front part of the trim. Here's a link: http://www.imagestation.com/mypictures/inbox/view.html?id=4264074295&url=http%3A%2F%2Fwww.imagestation.com%2Fpicture%2F sraid27%2Fp01fc92d80bfa4ef3ff0a3f92ab9d313a%2Ffe28 9c37.j pg&caption=Right%20Rear%20Corner%28Before%29
Anyways, what could be the problem? Could the quarter panel have been touched up before?
Thanks,

------------------
Trever Maas
1972 Chevelle Malibu
350/TH350
Undergoing Resotoration

[This message has been edited by malibu man (edited 10-30-2001).]

[This message has been edited by malibu man (edited 10-30-2001).]

[This message has been edited by malibu man (edited 10-30-2001).]

[This message has been edited by malibu man (edited 10-30-2001).]

[This message has been edited by malibu man (edited 10-30-2001).]

[This message has been edited by malibu man (edited 10-30-2001).]

You have to copy the whole link, past the blue part, and copy it. I couldn't get it to paste right, it kept on making spaces in the url.

------------------
Trever Maas
1972 Chevelle Malibu
350/TH350
Undergoing Resotoration

I'll try it again: http://www.imagestation.com/mypictures/inbox/view.html?id=4264074295&url=http%3A%2F%2Fwww.imagestation.com%2Fpicture%2F sraid27%2Fp01fc92d80bfa4ef3ff0a3f92ab9d313a%2Ffe28 9c37.jpg&ca ption=Right%20Rear%20Corner%28Before%29

Sorry, I can't see the problem. The photo is too dark. http://www.chevelles.com/forum/frown.gif

FastSS396man

------------------
69' SS396 Chevelle
L78 396/375hp
M-21 Close Ratio
10 year Resto
It's brand new again!

Yeah I figured that. Each time I try lighting it it makes it distorted.

Could someone make that picture easier to see? I've tried all that I can.
Thanks

------------------
Trever Maas
1972 Chevelle Malibu
350/TH350
Undergoing Resotoration

I cleaned it up a bit and circled out the spot I think you are talking about.. it looks like the chrome trim is bent too me.. hope this helps. but it looks like you have more 1/4 panel issues than the trim fitting right..
www.normieschevelle.com/fe289c37.jpg (http://www.normieschevelle.com/fe289c37.jpg)

------------------
X-Ray View of my Chevelle :D (http://www.normieschevelle.com/sideview.jpg)
Getting Closer (http://www.normieschevelle.com/passfull.jpg)

Thanks normie!!! I think the quarter panel is messed up because the trim is flush with the panel so that couldn't be it. Do you think someone added something to it? The other side is fine but not the right side.

------------------
Trever Maas
1972 Chevelle Malibu
350/TH350
Undergoing Resotoration

could be bondo.. or the result of a tire blowout or accident.. nothing a hammer and dolly won't take out of the 1/4.. but isn't that a 2 inch hole on the rear part of the 1/4 where it meets the trunk and bumper? If thats the case your going too have sheetmetal in the same condition as mine.. and unfortunately MINE wasn't pretty anywhere on the 1/4 http://www.chevelles.com/forum/frown.gif

------------------
X-Ray View of my Chevelle :D (http://www.normieschevelle.com/sideview.jpg)
Getting Closer (http://www.normieschevelle.com/passfull.jpg)

That spot by the trunk and bumper is just surface rust. It isn't a hole.

------------------
Trever Maas
1972 Chevelle Malibu
350/TH350
Undergoing Resotoration