heres where im at so far. the fenders have been cleaned to bright metal. the rust has been cut out in the lower portian behind the wheel and a 4x4 patch welded into each panel. a light coat of dyna glass has been applied and sanded. 2 coats of DP90 have been sprayed. i plan on letting this set for a wwek or so to harden and shrink. NOW heres the deal. i dont see to well anymore :( and didnt see the little door dings and my poor job of bondo work till the paint went on. do i scuff the dp90 and bondo and reapply dp90? do i need high build primer? will dp90 work over k36? (i would like to keep the car all 1 color primer if posible) can someone lay me out a plan? if i opt tp let someone do this for me what could i expect to pay? the fenders are in very good shape just need some minor finish work and primer. Thanks Dave

If its a catalyst type paint, you can wait a week or so then use 180 grit paper sand it then use a polyester filler such as metalglaze.Yes-you can put it on paint,if its already cured.Go to your local autopaint store and ask them for the polyester finish glaze,they will know what your talking about.Then sand,prime,sand and repaint.It will save you a few steps.if you can help it Dont break thru the paint