does anybody know if they make a replacement dash for a 67, I've seen the two piece kit Goodmark and other companies have but I also need the part where the pad bolts in. Also after installing a new trunk floor does anybody make the piece that curls up at the very end of the car, not the panel that has the trunk key but below that. any help would be greatly appreciated, thanks, cj

We replaced the entire metal dash from the windshield back. We bought a '69 Chevelle parts car to cut this piece out, then sold the remainder to Team Members at our cost. that way, we all came out ahead.

It wasn't that difficult, and we had an "Almost new" metal dash.

Are you going to stay with your stock bezel (Instrument Panel), or look for an aftermarket one?


------------------
Team Members Forever #341

Richard, Judy, MAXX2

'69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi., Full Aluminum Bed With Full Tubs, Aluminum Firewall, Custom Aluminum Dash/Gauge Bezel.

<BLOCKQUOTE>quote:</font><HR>Originally posted by bddj89:
does anybody know if they make a replacement dash for a 67, I've seen the two piece kit Goodmark and other companies have but I also need the part where the pad bolts in. Also after installing a new trunk floor does anybody make the piece that curls up at the very end of the car, not the panel that has the trunk key but below that. any help would be greatly appreciated, thanks, cj<HR></BLOCKQUOTE>
thanks for the info, I am currently looking for a good 67 parts car for that dash area, I was curious if they make a repro.