I thought id post a couple of vids of my biddies lightning I have been working on. We were real excited with the first passes out with it. We missed the stock suspension record by .003 on the 3rd pass. Any way here are a couple of vids. http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1690123837
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1690646291

that's pretty cool.

yea, Ive had a blast working on it. I think we are going to shreveport lousiana, on the 27th. he has the racing bug again. Its been down for a 1.5 yr with a blowed motor. ANd also those passes were the way we rolled it out of my shop. NO tuning on suspenion or engine at all. All we did was air in the tires and ice for the intercooler.

What kind mods if any did he do do to the engine?

well, its a aluminum 5.4 ltr (GT BLOCK) Stock heads( our ported ones got messed up at the cnc place) comp cams, Stock lower intake with a aluminum plate where the supercharger used to be. A wilson elbo, 90mm t/b. I made most of the turbo crossover and mounts. And hanging from the side is a little gt 47-88 turbo. The intercooler is where the pass seat used to be. We switched to a th400 trans. 4400 stall. Stock rear axle. Monoleafs and QA1's in the rear. front is tubelar a arms, and QA1's. ANd a 25.5 speck c/m cage, done by chandler chassis works. Even has a chute hanging off the back. But best of all Still drivable on the street. And is pump gas friendly (as long as its C12) Thats about it. He does all the motor tuning and I do the suspension. As u can see i have a bunch of work ahead.

It still pretty cool.

Thanks,