|
JimD Jan 14th, 05, 5:14 PM Has anyone found a way to access the back of the fender to attach the speed nuts? I'd rather not pull fenders and risk scratching new paint just for that. Ive searched and seen some that 3m glue/tape and thats an option, but i'd rather stick the nuts on if possible. Ideas? BEECHFRONT Jan 14th, 05, 5:49 PM i have access to mine with the inner fenders removed JimD Jan 14th, 05, 6:09 PM Originally posted by BEECHFRONT: i have access to mine with the inner fenders removed Yea but i'm an idiot, my inners are on too,Lol. BEECHFRONT Jan 14th, 05, 7:51 PM if it were me i would remove the inner fender, just be careful, i still have to install mine on a freshly painted car 540cutlaSS Jan 14th, 05, 9:55 PM If you have not installed them yet you can use a barrel nut. It pushes in the factory hole from the outside. The nut has a barb/s on it to hold the pin part of the emblem. They work very well. Should be able to find them at any auto paint store, Lowes, Home depot. Leroy. JimD Jan 15th, 05, 6:25 AM Originally posted by 540cutlaSS: If you have not installed them yet you can use a barrel nut. It pushes in the factory hole from the outside. The nut has a barb/s on it to hold the pin part of the emblem. They work very well. Should be able to find them at any auto paint store, Lowes, Home depot. Leroy. Great idea, i'm gonna give this a shot. | ||