I picked up a set of rear disks from SSBC (Part # A125-3) a while back and am finally getting around to installing them ('65 SS). The instructions "say" one thing and the diagram shows a different setup (caliper up/down, parking brake routing). Anyone have pictures (and/or advice) of this setup installed on your Chevelle showing caliper position and parking brake cable routing on a 10 or 12 bolt rear end?
Thanks in advance.

I can't help with cable routing but the calipers go on so that the bleeder is facing up.

http://www.chevelles.com/showroom/data/500/disc_brakes_1_.JPG

Thats all I have.

Thanks. I'll tinker this weekend.