I was looking at a lot of motors under the post of "What does your engine compartment look like" and noticed quite a few people with different types of brackets for the throttle cable and return springs. What confused me is some of the had the return springs coming from the front of the motor. I am curious what people think about these and if you have any pictures because I am putting the finishing touches on my 468 with a Weiand Team G intake and a Quick Fuel carb and wonder if these brackets are something my motor would benifit from. I appreciate your thoughts and
HAPPY NEW YEAR :beers: :beers: :beers:

Are you talking about one of these?


http://memimage.cardomain.net/member_images/3/web/711000-711999/711771_23_full.jpg

If so, it is Jegs PN 555-15237

Are you talking about one of these?


http://memimage.cardomain.net/member_images/3/web/711000-711999/711771_23_full.jpg

If so, it is Jegs PN 555-15237

Hey, That looks just like one of the motors I was referring to. :yes: :yes:
Some of the others were quite bigger and a little more obvious. I should guess there are benifits to using one as opposed to those little towers that bolt on to the manifold.

i ust got that same bracket, holy crap does those springs make hte pedal hard to push, my right foot is more tired from holding that pedal than my left foot is from using the clutch haha