I need a picture of the lower backside of a 70-2 fender.I need to fabricate a lower brace section,since mine is gone i would like to see how it should be.Thanks.

------------------
http://photos.yahoo.com/ochrisl
Updated 4/30/02

I know the Elcamino and Chevelle fenders are different, but see if these pics can give you some kind of idea. They are from an Elcamino.

up from the bottom (http://www.chevelles.com/showroom/tempbrace3.jpg)

towards the front (http://www.chevelles.com/showroom/tempbrace2.jpg)

from the middle (http://www.chevelles.com/showroom/tempbrace1.jpg)

If the pics aren't clear enough, try resizeing them. I tried to make them as big as possible to show clarity,, but I think it backfired. Hope this helps, Cal

EDIT:

I can't get the 3rd pic to work for some reason, and it was the best one,,,,,lol. Sorry they kinda suck.

------------------
TC Member # 1308

my trailer queen (http://www.chevelles.com/showroom/trailerqueeny.jpg)
future racer (http://www.chevelles.com/showroom/austin.jpg)
justins 67 (http://www.chevelles.com/showroom/67sideveiw.jpg)
cals caminos web site (http://72sselcamino1.tripod.com/calscaminos/)


[This message has been edited by 72sselcamino (edited 05-12-2002).]

[This message has been edited by Dean (edited 05-13-2002).]

NO need to fab it up. I just saw the inner brace (lower portion) in the Year One catalog for 70-72 fender.

I just checked their website and they only list the brace repair section for 68-69.They have the lower patch panel for 70-72 but that is the outer sheetmetal only.If you see it in your catalog let me know,it must be new if it is available.

<BLOCKQUOTE>quote:</font><HR>Originally posted by 72sselcamino:


up from the bottom (http://www.chevelles.com/showroom/tempbrace3.jpg)

towards the front (http://www.chevelles.com/showroom/tempbrace2.jpg)

from the middle (http://www.chevelles.com/showroom/tempbrace1.jpg)


I can't get the 3rd pic to work for some reason
<HR></BLOCKQUOTE>

pics look good Cal, you left off the "jpg" on the last one