I took most of my dash bolts out and now I see what I was having problems with. In the bottom right of this pic they have a hole, what are the wires that go into that hole for? http://www.chevelle-ss.com/Members_Pages/Mike_S_files/Custom_Gauges/Full_Rear.jpg I also can't remove the conectors for the idiot lights, how do I do that? I may just cut them because I won't reuse them. This really isn't a hard project, but I don't have the money to fix anything if I break it and I have never done this. Thanks for the help guys.

On mine, the 3 holes on the right side of the pic are from right to left: Left turn arrow, red brake, and I can't tell-possibly blue hibeam? I still have all mine attached and kinda hard to get at right now.

Just went through this myself, replaced the dash in my sprint. The connectors for the light bars have clips (molded into the plastic housing) on both ends. I removed mine with a small flat blade screw driver on both sides to push in the clips. Make since?

Sorry not quite sure what hole your referring to on the bottom right? All I see is the idiot light holes.

Make sure you get the wire that screws to the column for the gear indicator. That one threw me for a loop.

The hole I am talking about is above the two idiot light holes on the right side, you cant see daylight through it, it is the only hole on the right in that spot, you should be able to see it. a red and black wire go into it if I am not mistaken.

The hole I am talking about is above the two idiot light holes on the right side, you cant see daylight through it, it is the only hole on the right in that spot, you should be able to see it. a red and black wire go into it if I am not mistaken.

Check your Private Messages.

Well after cutting my hands to bits and help from a friend I got it out. Now the fun starts. Thanks for helping out.