Where it line that runs along the frame to the back hose...

Whichhole does the hose come out of, there are two close to eachother..
Does the end with the tight loop go there or up by the proprtioning valve?

I have a retrofit line kit fwiw...Cant get any photos from the place I bought them from..

Close ups would be great.
Thanks:beers:

I'm reinstalling the lines on my '65 Elky, and your frame and lines are basically the same as mine at the rear. The tight loop goes towards the rear end. Which hole? I clipped mine in place and let it find its own spot on the crossmember. The body is back on the frame so I don't think I can get a usable pic, but if you start at the prop valve and work your way back it should fall into place.

Ditto what Jeff said, and if pictures help:

http://heartland.chevelles.net/RCstorage/framerearsusp.jpg

http://heartland.chevelles.net/RCstorage/currieupon.jpg

I'm reinstalling the lines on my '65 Elky, and your frame and lines are basically the same as mine at the rear. The tight loop goes towards the rear end. Which hole? I clipped mine in place and let it find its own spot on the crossmember. The body is back on the frame so I don't think I can get a usable pic, but if you start at the prop valve and work your way back it should fall into place.


Cool, looks like its the smaller hole, thanks a mil!

Rich, your chassis looks insane, thanks for the pics. Looks like the end of the brakeline with the 180 bend goes to the rear then...I almost ran the line through the triangular hole in the lower control arm bracket, looks like it runs above...Rich, what is that cable for on to the right of the pic?

Thanks!


The body is still off so I have no idea where the lines supposed to end up...Looked at the proportioning valve, dont know which hole the rear line plumbs into. Just had t ask so I dont have to do this over too LOL! :hurray:

Who makes those upper trailing arms?

That is a sweet looking frame.

I believe that is an airline for the airbags in the springs.