coddingtonchevelle
Dec 15th, 06, 12:41 AM
I was wondering how to remove all the trim ( 4 chrom circles) igintion lighter wiper, and lights, without breaking the plastic. I have removed all the little screw and bolts but both the braces that connect the two on either side wont budge.
67shovel
Dec 15th, 06, 10:15 AM
Ignition: Insert key, turn to ACC, insert a straightened paper clip wire into small hole by key and continue turning to the left. It should release itself and come right out. Turn the switch back off with a screw driver.
Lighter: Get behind it unplug the wire, now unscrew the back from the front piece.
Wiper: has a small set screw on the knob.
Lights: reach behind dash to the light switch. find and depress small spring loaded pin while pulling the light switch out. The knob and shaft will come out and then you can unscrew the bezal. Put the shaft back in the switch to push the lights back off and then the shaft pulls out again, To install you have to hold the pin down while pushing the knob back in.
coddingtonchevelle
Dec 15th, 06, 7:34 PM
thanks for you help.... what if I dont have the key... cauz i bought a replacement dash and they sent it with the old trim buy no key, do i jam it with a screwdriver and turn to acc? thanks