hi i am building a 383 and i dont know what intake to go with.the car will be street driven alomst all the time.here is my combo.

smlb 350 bored .030
brodix ik 200cc heads with cnc option and 1.4 springs i believe
voodoo 284 cam
11.1 compression srp flat top pistons forged i believe
scat crank forged
i beam connecting rods
holley 750 dp

do i go with the brodix single or dual plane intake or do i use another company such as the performer rpm intake.if i go with other then the brodix intake do i have to port match the intake to the brodix heads.thanks for all the help you guys have given me the past few days.as soon as i get back to the states since i am currently deployed to afghanistan i will post pics of the engine build.thanks again for all the help.

matt:)

RPM Air gap seems to be the hot set up for HP street machines as long as you're not driving in cold weather- no carb heat.