|
66n67 Apr 7th, 04, 10:56 PM I saw a part number for some large washers to weld onto the frame to repair it for the body mounts on the SUPER WAGON PAGES. Well those wonderful pages seem to be off the net and I need those washers, anyone have a source? Any other FRAME mod suggestions? I plan on cutting out the sway bar mounts and weld 3/8 steel inside flush with the frame for added strength. Thanks, Mark airrj Apr 8th, 04, 8:16 AM Try this. (http://home.comcast.net/~adelalohr/einstyn1/einstyn-06.htm) frankg70ss Apr 8th, 04, 2:48 PM How bad are you frame holes are they totally gone.Most of mine could be ground and built up with mig welding. Bill Rose Apr 8th, 04, 3:10 PM I had some rust on the rear mounts of my 71. I cut and welded steel over the area then cut it back out with a hole saw... Mike1970 Apr 8th, 04, 6:56 PM Original Parts Group (OPG) has them for 64-72. Part #C21159-set of 14 for $39.95. 66n67 Apr 9th, 04, 11:27 PM Thanks airrj and everybody smile.gif Tomb7us Apr 10th, 04, 12:09 AM big washer from ace hardware here BEFORE: http://home.earthlink.net/~baygentst/images/before.jpg AFTER: http://home.earthlink.net/~baygentst/images/after.jpg Good luck! It is a very easy process how bad are your frame holes? where are they? Mine are welded flat now and painted over so it looks brand new | ||