Cam Dynamics 306 Enforcer Specs [Archive] - Chevelle Tech

: Cam Dynamics 306 Enforcer Specs


64CDNSS
Nov 23rd, 06, 3:33 AM
Do any of you guys have an old Cam Dynamics catalog around? I would like to get the specs on a 306 Enforcer hydraulic cam.

Years ago I had a 306 Enforcer in my '66 Acadian and would like a similiar cam for my Malibu.

mr 4 speed
Nov 23rd, 06, 8:02 AM
BBC or SBC ?

joespanova
Nov 23rd, 06, 8:27 AM
WOW! One of my old favorites!............245@ .050 and .500 lift.............the next step up was what they referred to as their ultimate hydraulic weapon (.260@.050 and .525 lift) I used both. With a throw together junk 11-1 350 and 1.94 461 heads in a 3300 lb Nova (not the one I have now) it ran 11.60s ( with the .260 cam)....this was back in 1980-82 with a Muncie 4 sp ( M-22 ) Rock Crusher and I think 5.13 gears in a 12 bolt.

I actually still have the 1982 catalog from them....so if you have the big block version ( I guess there was one) and no-one else can find the info I can get it for you.

SWHEATON
Nov 23rd, 06, 9:40 AM
FYI,Cam dynamics & crane have the same company address hence same company like Cevy & GMC kind of thing.

I noticed that the crane & cam dyn cams had either exact same pt#s or very close with a letter or diget different so a crane cam cat from that time period would also have the specs cam listed for your cam.

Scott

64CDNSS
Nov 23rd, 06, 1:38 PM
Thanks Joe. It was the small block version. What was the LSA??
My old engine was an 11:1 355 with 462 heads, 650DP on a Victor Jr. and 1-3/4 fenderwell headers.
It was in a 66 Acadian with a 10" TCI converter and 4.56's.
It ran 92mph in the 1/8 on G60-15 street tires!! That was with the tranny going south too.

joespanova
Nov 23rd, 06, 2:49 PM
Thanks Joe. It was the small block version. What was the LSA??
My old engine was an 11:1 355 with 462 heads, 650DP on a Victor Jr. and 1-3/4 fenderwell headers.
It was in a 66 Acadian with a 10" TCI converter and 4.56's.
It ran 92mph in the 1/8 on G60-15 street tires!! That was with the tranny going south too.


They weren't providing that info in the catalog.......I looked. Probably 106-108.

dwhitf
Nov 23rd, 06, 3:38 PM
.500 lift 306/306 245/245@.050 106LSA

Super Chevys Doug Marion put that cam in a 62 vette 331,11:1 cr,780 cfm
Holley Strip Dom. Super T-10 and 5.13 gears to the tune of 11.86@112 mph
3440# w/driver. (from memory) 1980's

Later
dwhitf