Epoxy primed,sanded,2k primed the wagon. Now I'm block sanding,have found a low spot that needs more than 2k primer can fill. Can I add some Metal glaze filler to the area over the 2k filler? Or do I need to go back down to the epoxy?
I've searched all kinds of past threads and can't find anything on adding glazes to 2k primers... Evercoats web site says it CAN be added to catalzed primers! Thanks.

Rick

Yes you can put a glazing putty over a 2k primer, you need to scuff the area well though, at least 220, I like to sand with 180 or even 150 in the area I will be applying the glaze. Only use 2 part glazing putty, the single stage air dry stuff is junk.