Can anyone who has ordered a full trunk floor tell me if any of them completely replace the original? I'm looking for one that goes (front to back) from the inner fender wells to under the rear tail pan (between deck lid and bumper) and extends (left and right) to the trunk floor extensions. In other words, same as the original at the rear and sides.
Thanks,
Rich

I ordered the trunk floor from Year One and the kit i ordered had the body mount braces and fuel tank braces as well as the three piece floor pan. I am just now installing it. It covers from the midway down of the front drop to the back and clear to the top where it curves back up. It also extends from the far left to the far right as the factory piece was. Hope this helps.
Josh
66 chevelle

I have the same setup. It's being replaced as we speak, along with other body work. I'd say it covers 90-95% of the entire trunk, although I haven't actually seen mine completed yet... http://www.chevelles.com/forum/wink.gif

------------------
JR
TC #1098
My 69 Convertible (http://www.erols.com/ruther/69conv)

My 2001 Z28 (http://www.erols.com/ruther/z28_5.jpg)

I used the 7 piece kit from OPG. 3 pc floor plus the braces. Pictures on my webpage under bodywork show the coverage.

------------------
http://webpages.charter.net/65chevelle/