Have my SS dash together and want to bench test guages and lights. I have Steves instructions on how to test each item. What I don't get is it says to connect to "pin" 12, pin 8, pin 5 ,etc. How do you know which number each "pin" is on the PCB nothing I can see is marked or am I totally off base here and should be looking somewhere else for the "pin"s?

Thanks,
Dave

Pin #'s are only marked on the connector that plugs into the circuit board. Pin #1 would plug into the circuit board trace to the one closest to the top of the cluster. The top row goes 1 through 6 then jump across to the bottom row is 7 thorugh 12