69 Grille question [Archive] - Chevelle Tech

: 69 Grille question


Tom Hendricks
Aug 18th, 01, 5:44 PM
I have been looking at two 69 SS's. One has a stainless steel center bar. Are they all supposed to have the trim in the center or are there some variations by plant or build date ?

Fred Aldrich
Aug 18th, 01, 6:00 PM
Correct '69 SS grille has a stainless center strip and molded (not drilled) center strip attaching holes.

------------------
Fred Aldrich
The Chevelle Engineer
Web Site: www.CoreComm.net/~faldrich (http://www.CoreComm.net/~faldrich)

Tom Hendricks
Aug 18th, 01, 6:06 PM
Fred:

Mine does not have the stainless center strip. It does not have any holes either. Do I have the wrong grille or do I just need to add the center strip. Any exceptions to the rule on these grilles.?

IGOTTA71
Aug 18th, 01, 6:49 PM
Tom it sounds like you have a GM replacement grill like Year One sells. If I am correct those grills were for a 300 Delux, which does not have a center molding.

------------------
Jason Babal
69 Chevelle SS
3450lbs.
http://www.chevelles.com/showroom/igotta711.jpg The launch

http://www.chevelles.com/showroom/igotta7110.jpg Me(on the right)

Raymond
Aug 18th, 01, 7:09 PM
It seems that all replacement grills have to be drilled for the center molding. It will look fine when you put it all together.

djw
Aug 18th, 01, 7:10 PM
Tom, check this post. Lots of info and discussion on the 69 grilles.
http://www.chevelles.com/forum/Forum3/HTML/003759.html

------------------
"Wrinkles only go where the smile has been!"
Buffett

My Elky (http://www.chevelles.com/showroom/bridge04.jpg)

My Webpage (http://www.geocities.com/djw999450/automotive.html)

Danny Wooldridge
Member #1129
69 el_Camino

Tom Hendricks
Aug 18th, 01, 7:40 PM
Thanks guys !

Just when you think you have the car dialed in, you find something wrong !! http://www.chevelles.com/forum/smile.gif

Looks like I need the right grille with the center molding.

Thanks again !

Derek69SS
Aug 20th, 01, 10:44 PM
is there any place where i could find a new center moulding w/ no holes for SS emblem or bowtie??? i have NO emblems on my car other than the bowtie, but i'd like to lose that too.

------------------
Derek Kiefer
ss_chevelle_69@hotmail.com
Derek69SS = AOL instant messenger

69 Chevelle SS 69 Chevelle Malibu
23 Ford Model T

"this is my sandbox, i'm not allowed to go in the deep end"-Ralph Wiggim

BlueBowTie
Aug 21st, 01, 9:11 AM
I have never felt so unwanted! http://www.chevelles.com/forum/rolleyes.gif