After removing the interior panels from the rear passenger area of my 71, I looked at the backside of the rear quarters over the top of the rear wheels and noticed that the sealer is dried out and that several chunks are missing. After I clean this out and apply Por to the backside, what kind of sealer do I need to put back in there to keep water out?

3M has a soft set seam sealer or a urethane seam sealer. the soft set can come in a tube(for caulking) or bucket(for brushing on). The urethane takes a special type caulking gun and is somewhat expensive but it will last forever I believe.

------------------
Elcaminos are special!
I'd rather walk around with a Chevrolet hubcap in my hand than drive a Ford


work in progress
Big James Elky(AKA Ol Paint) (http://www.chevelles.com/showroom/Big%20James4XL-Ol%20Paint1.jpg)
www.chevelles.com/showroom/workgoeson1.jpg (http://www.chevelles.com/showroom/workgoeson1.jpg)
www.chevelles.com/showroom/newpaint1.JPG (http://www.chevelles.com/showroom/newpaint1.JPG)