I need a picture, diagram or an installation precedure for the rear trunk torsion? "springs" which hold up the rear deck lid. When I bought the car, the previous owner had broken one of the springs. He took it to a shop and had it welded but he never installed it. I tried for a good 2 hours but I need a someone from Mensa to figure this damn thing out. Looked at my 64 but it's totally different. Any help is much appreciated.
Thanks in Advance, Steve

Steve if you don't get a quick answer e-mail me and next time I go to my car ( at shop 1/2 hour away ) I will take my digital camera and check my Body manual .... my car is ready to come off frame so easy to get good pic.

CDN SS..
Thanks for your reply. I would greatly appreciate it. Like I said in the previous post It's like a damn puzzle to put that together.
Thanks once again.
My e-mail address is: stavros7_a@yahoo.com
Steve

Steve, check your mail.

------------------
Larry
TC # 1000
66 Malibu - under transformation
My 66 Chevelle (http://www.users.qwest.net/~larry_macdonald)

I need to know also,so PLEASE!! if its something that can be posted on here ,POST IT,don't email it to the person.

If you just email it to someone its of no use to the people that search for it.

I normally respond here. But this was a very large file that contained both graphics and text. It also required a special reader to view.

If you email me I will be happy to forward the same message I sent to Steve.

------------------
Larry
TC # 1000
66 Malibu - under transformation
My 66 Chevelle (http://www.users.qwest.net/~larry_macdonald)