|
jfman Oct 29th, 06, 8:31 PM I went to autozone to buy axle seals for the rear end (10 bolt) of my 70 chevelle and they said that they cant get them (dealer only parts). Anybody know where I can get some ? I have access to autozone, pepboys, Oreily and NAPA dyno jonn Oct 29th, 06, 9:40 PM Thats because they're HUA ;) . They probably have them in stock. National part # 8660s or 8835s, dont remember which it is, but it's one of those. If they don't have National they can interchange those numbers to whatever they have. jfman Oct 29th, 06, 9:59 PM What's HUA ? meb Oct 29th, 06, 10:39 PM GM dealer probably has them big gear head Oct 29th, 06, 10:59 PM Any auto parts store with someone with a little bit of brains will have them. They are very common and still in use up to '02 when the last Camaro was built. The National number is 8660S. 70 SS LS-5 Oct 29th, 06, 11:07 PM What's HUA ? Head Up Ass.............Describes most parts guys these days pretty well. HOGDADDY Oct 30th, 06, 2:23 AM Summit. Jegs, Moser, others have them. rusty66 Oct 30th, 06, 2:28 AM I just replaced the seals in my 3.08 axle with national 8660S. The ones that came out carried nr 3832418 Canada. Rob wilmaya Oct 30th, 06, 7:46 AM NAPA, CR number is 13992 if it helps. jfman Oct 30th, 06, 4:25 PM All the 10 bolts use the same seals ? 8.2 here big gear head Oct 30th, 06, 9:16 PM All of the car (except Impala) 7.5, 8.2, 8.5 and 12 bolts use the same axle seals and bearings. jfman Oct 31st, 06, 4:00 PM Ok thank you guyz for all of the info. | ||