|
: just applieds 1st coat of rage filler............ starsstripes Apr 9th, 01, 12:23 PM over the sail seam.how long should i let it dry before sanding? ------------------ jim #899 68 SS396 CHEVELLE CONVERTIBLE 70 SS396 ELCAMINO cars, guns & guitars.....& beer... it doesn't get much better than that. 70isfine Apr 9th, 01, 4:13 PM I usually sand the first coat in about five minutes with 36 grit.I wait till you can just barely leave a thumbnail print in it.It sands easy,the dust is kind of 'fluffy' so it falls on the ground and doesn't turn to dust and choke everyone..Dont sand it all off though,just knock it down semi flat.Then I wait about ten minutes,or till its hard,and sand it flat and then repeat that,then go to 80 grit and finish around 120 then go to glaze.If you wait for every coat to get rock hard it will take you forever. ------------------ 70 chevelle,400cid turbo400.blue with silver stripes. www.members.spree.com/entertainment/ochrisl/ starsstripes Apr 9th, 01, 9:01 PM 70isfine, thanx i'll do that. jim ------------------ jim #899 68 SS396 CHEVELLE CONVERTIBLE 70 SS396 ELCAMINO cars, guns & guitars.....& beer... it doesn't get much better than that. | ||