MOLLYDEES68
Aug 8th, 00, 7:07 PM
LOOKING FOR THE FRONT MOLDINGS FOR A 68 CHEVELLE. THE SO CALLED"HOCKEY STICK" MOLDING. I HAVE LOOKED AT YEAR ONE, OPG, PADDOCK WITHOUT ANY LUCK. WHO CAN HELP ME FIND THESE MOLDINGS?
|
69_Malibu Aug 8th, 00, 7:34 PM look in the opg catalog on pg 101 the eyebrow molding for a 69, isnt it the same on the 68? Byfield Aug 9th, 00, 5:41 AM Pretty sure it's not the same as a 68. There are also 2 different lengths for 68. Kurt MOLLYDEES68 Aug 9th, 00, 1:30 PM SPOKE TO OPG. THEY DO NOT HAVE THEM TIM Byfield Aug 9th, 00, 1:44 PM Tim: Please turn off the caps lock button. It's viewed as yelling in the e-mail realm. Molding: Try Year One and Ground Up. They may have it, but I get the feeling that you'll need to buy used or hope to find some NOS. Do you need long or short style? Kurt Sidros68SS Aug 9th, 00, 6:00 PM Tim, I'm pretty sure year one has em. There were two different types, one type was used if car had stripe, other was used if there was no stripe JWA Aug 10th, 00, 10:43 PM Tim, Try these guys: http://www.true-connections.com/. A friend of mine has been dealing with them on his 65 and has been happy with their sevice. Otherwise I don't think the molding is available repro yet but I believe it is in the works. Good Luck. As for the 69 parts, they are different. ------------------ Jeff Angerstein ACES#841 TCG#158 68 SS396(FULL ROLLER 454) 68 L78 Project 69 SSRS 396(roller427) 4spd 87 MC SS jeffa@chevelles.com My Chevs (http://www.tcg158.homestead.com) My Favorite (http://tcg158.homestead.com/files/drvr.jpg) Favorite Tshirt quote: NHRA T>>Nerves of STEEL, Will of IRON....FOOT of LEAD! [This message has been edited by ACE841 (edited 08-10-2000).] dselko Aug 11th, 00, 6:18 AM I see in year one's catalog they have the 1968 front fender molding. Yes, it looks like a hockey stick. P/N XQ9RH and XQ9LH $45 per pair or $24 each. Also our sponsor Ground Up has them in their catalog with a comment call for price. Call Ground up first to see if they have them. thornbe Aug 11th, 00, 6:52 AM Try Ground Up (site sponsor) or National Parts Depot. Byfield Aug 11th, 00, 7:52 AM The ones in the Year One catalog are the LONG style moldings. They are the ones which go all the way down the front of the fender. If you need the short, you'll have to look for used or NOS. If you do find some used ones, make sure they have the mounting tabs on the back side. They can be removed. Kurt | ||