steelworker198
Nov 10th, 04, 10:09 PM
was wondering, have all the bolts out of body ready to lift off frame, which are the best floor braces for lifting the body up evenly? thx steel
|
flywheel Nov 11th, 04, 9:07 AM I used my engine hoist and chain, front, I had the front clip off and hooked it to the fire wall area where the frame bolt holes are. Rear, I hooked it to the lip under the bumper (it was off). Each end was raised up and a 4x4 was slid under and set on a couple concrete blocks! Just one way I suppose.... graemlins/waving.gif Rick steelworker198 Nov 11th, 04, 4:10 PM thx rick, bills71 Nov 11th, 04, 8:49 PM i just did my 71 this spring, also used engine hoist for front. i have a small front loader ,so lifted under trunk where the bumber gos. then slid 4x4 s under and cinder blocks .take your time and go slow .no problems. bill 69ssmike Nov 11th, 04, 8:56 PM Hmmmmm.... I don't think take your time and go slow are in Steel's vocabulary!!! graemlins/waving.gif Mike | ||