The Revolution
Oct 10th, 06, 9:51 AM
Does anybody in the Dallas Fort Worth area know where I can geta Ford 9inch?
|
Clint44 Oct 10th, 06, 3:54 PM Can you be more specific as to what you're wanting to do? If you're wanting a custom 9" for your 68,Joe Wilson Race Cars in Garland can build you one. He built the Chassisworks Fab 9 in my car. The Revolution Oct 10th, 06, 4:24 PM more looking for the rearend right now, ive got a place that can do it, but he is out of pocket due to outlaws this weekend and his ends are a little on the highside furball8994 Oct 10th, 06, 4:37 PM Alex. Are you looking to go cheap or quality? If you want the latter try here Currie enterprises. (http://www.currieenterprises.com/cestore/productsCR.aspx?id=2685&p=1159.9500) The Revolution Oct 10th, 06, 8:52 PM honestly, the cheap way. I just want the housing and I can give it to a well known guy to do the work needed and it will be way under waht Currie is charging big gear head Oct 10th, 06, 9:43 PM Go to the salvage yards and look under Ford trucks. You might even get lucky and find a nodular case with a Daytona pinion housing. The Revolution Oct 10th, 06, 10:26 PM searched...zero sschevellefan Oct 10th, 06, 10:54 PM There is a guy on ebay selling them for about $350 plus shipping for a bare housing. I bought a housing/axle/carrier kit from him and the housing was awsome. My buddy has a moser housing and he said it looked as good as his. I`ll probably end up buying another one for my current project. The Revolution Oct 10th, 06, 11:14 PM ok cool, ill check ebay sschevellefan Oct 10th, 06, 11:25 PM here`s a link for you http://cgi.ebay.com/ebaymotors/9-Ford-GM-A-Body-Rear-End-Axle-Housing-1964-1967_W0QQcmdZViewItemQQcategoryZ33731QQihZ012QQite mZ220036505914QQrdZ1 The Revolution Oct 11th, 06, 8:38 AM o awsome, I didnt know it was already cut and ready to go, very nice! Thanks | ||