(For my 67 Chevelle SS) How can you tell if the switch is working .I had it sent to me. The thing I did see is the 2 prongs are loose .does that make a difference when the harness is plugged in.

also I need to know where to get a bracket for it.My carb is Holley 4780....
Thanks for the help
-------------------------------
67 Chevelle Ss

You can test the switch with a ohm meter, just check for continuity when you depress the switch. I would think you could solder the loose terminal lightly or possibly take it apart and re brad it. The Mount Bracket is available repo or on Ebay. You may need to look at some Camaro sites to find them.