Anyone used these? Looking at the NAPA Underhood Black and Chassis Black. I would imagine it's the Underhood Black for the cowl?????


Thanks,

------------------
JR
TC #1098
My 69 Convertible (http://www.erols.com/ruther/69conv)

My 2001 Z28 (http://www.erols.com/ruther/z28_5.jpg)

[This message has been edited by jerryr (edited 04-09-2002).]

I have used 2 colors from NAPA. Vermillion red and Viper red they both turned out good. Expencive though. I payed 28 dollars for a pint of paint.

JR, it sounds like you are talking about a "TECnique" aerosol can. Chassis Black #7243 and Underhood black #7242. This are very good quality products for a "rattle can". As aerosols go, you'll be happy. The whole "TECnnique line is pretty good, just don't think that the "chrome" on the cap of the argent is going to look like that! http://www.chevelles.com/forum/smile.gif

NHRA1877, unless you are getting hosed by your jobber, NAPA's paint (Martin Senour, made by Shewin Wiliams) is about 10% less than Dupont or PPG in a weighted average acoss all colors. Your PPG or Dupont jobber may be giving you bodyshop priceing, many do to everyone. If they are, I would say that is where you should shop. I am a M-S fan, but PPG and Dupont are very good products and when it comes to money, I would run to them! http://www.chevelles.com/forum/smile.gif


------------------
1965 Buick Gran Sport Convertible
1965 Buick Skylark H/T
"Fan of most anything that moves human beings"

Thanks martin. Yes, it was the aresol cans I was looking at. I just want to paint some brackets, the cowl, stuff like that.

Thanks again.



------------------
JR
TC #1098
My 69 Convertible (http://www.erols.com/ruther/69conv)

My 2001 Z28 (http://www.erols.com/ruther/z28_5.jpg)