|
gehant2006 Oct 2nd, 06, 6:23 PM I just about have all the under coating off the bottom of my car,and boy was that alot of fun. I am wiping it down with wax an grease remover I was wondering what would work preparing it for paint, not planning on sand blasting do not want the mess. thank you Mike shep_77 Oct 2nd, 06, 10:34 PM Wire brush on a grinder should clean it up nicely. cuisinartvette Oct 3rd, 06, 3:05 AM You are a glutton for punishment, my friend. Should turn out good in the end, btdt. ssal396 Oct 3rd, 06, 10:51 AM I did the majority of the work under my car with a drill with a wire wheel on it, then finished it with a dye grinder with a paint & rust remover pad on it.. Came out really nice, but as you well know, it's not a lot of fun :sad: BTDT :thumbsup: Andy69 Oct 3rd, 06, 11:23 AM what did you guys put on it its place? just a good paint? | ||