Looking for a patch that goes around the whole wheel opening in the rear. Does anyone make such a thing? This is for a 70 Chevelle.

LK

I purchased a lower repair panel but have not tried the fit yet. It is the full length of the 1/4 panel and about three inches higher then the wheel opening. I got it here:

http://www.crosscanadaparts.com/cgi-bin/crosscanada/product_list.html?img_num=708

The part# is 708-50L and 708-50R

If the link doesn't work here is the main page:

http://www.crosscanadaparts.com/cgi-bin/crosscanada/index.html

Paul

Looking for a patch that goes around the whole wheel opening in the rear. Does anyone make such a thing? This is for a 70 Chevelle.

LK

most companies call it a full 1/4 when it goes just above the body line(70-72)others go all the way to the roof. i saw one that was just above the fender, but seems to be discontinued. i can also tell you it is easyer to replace a 1/4 than to just replace around the wheel opening. so i would call opg becouse they used to make an inner lip whitch came with a bend for the outer lip, and it was not in the cataloge, but i tried to get one for the other side, and he said there was no sutch thing. i also know the metal thickness is not the same for aftermarket as original.
jamie

i have a L-H quarter new repo i could sell you for 110,i am in WI

Sent you a P.M.

LK