|
Clyde's 67 Sep 29th, 06, 1:57 AM Hello, I'm looking at putting a 502 Crate with EFI in my 67 convertible. Can the standard fuel feed line be used with this EFI. I know I have to install a pump in the tank but I need a return line also, where can I find this line and will the original feed line work? thanks fotoboy Oct 24th, 06, 4:06 AM Prob not considering you need around 50 psi 67shovel Oct 24th, 06, 9:45 AM I don't know much about EFI set ups but you could order an aftermarket 1/2" fuel line for your 67 and use the original 3/8" line as the return line. Mount the new one right next to the original line. 72chevy Oct 24th, 06, 3:43 PM I don't know much about EFI set ups but you could order an aftermarket 1/2" fuel line for your 67 and use the original 3/8" line as the return line. Mount the new one right next to the original line. Good call. Use the original line as the template to bend up the 1/2 " too. 70ElkySS Oct 24th, 06, 4:30 PM I don't know much about EFI set ups but you could order an aftermarket 1/2" fuel line for your 67 and use the original 3/8" line as the return line. Mount the new one right next to the original line. Maybe. Some pumps require a return line equal in size to the supply line. Might want to check on that. | ||