gonracn
Sep 25th, 06, 11:24 AM
Does anyone make reproduction plastic inner fenders for a 69.
|
Finally Sep 25th, 06, 6:20 PM Clink on the 'SS' link at the upper right corner of your screen, Ground Up the site sponser sells them. Most other resto places sell them as well. Mr69 Sep 25th, 06, 6:43 PM I see metal ones in their catalog, but not plastic. The 70-72 plastic inner fenders are not the same as the 68-69. They have a large lip where the rubber flaps attach. 68-69 do not. Come to think of it, I have never seen plastic inner fenders on a 68. I'll bet 69 plastic inner fenders are one year only. It should also be noted that 68 will have holes for the front signal light wires to go thru, (using a grommet). Also, 1968 Chevelles with A/C will have a double hole(also with a special grommet) for the A/C lines, from the condenser to the compressor, to go thru on the pass side. Plastic inner fenders for the 1969 Chevelle are made out of unobtainium. Dean Sep 25th, 06, 7:04 PM I see metal ones in their catalog, but not plastic. The 70-72 plastic inner fenders are not the same as the 68-69. They have a large lip where the rubber flaps attach. 68-69 do not. Come to think of it, I have never seen plastic inner fenders on a 68. I'll bet 69 plastic inner fenders are one year only. It should also be noted that 68 will have holes for the front signal light wires to go thru, (using a grommet). Also, 1968 Chevelles with A/C will have a double hole(also with a special grommet) for the A/C lines, from the condenser to the compressor, to go thru on the pass side. Plastic inner fenders for the 1969 Chevelle are made out of unobtainium. I learned something there, I didn't know that the A/C discharge line went though the inner fender. I thought it went through the core support. I replaced the plastic inner fenders on my 69 with metal ones. al carson Sep 25th, 06, 8:43 PM Contact www.YearOne.com Finally Sep 25th, 06, 8:56 PM Sorry, thought GU add them. NPD has them. www.npdlink.com spi7 Sep 25th, 06, 9:27 PM The paddock has them but they are poor quality. Some of the holes were half an inch to one inch off. Trust me I know! Ark68SS Sep 25th, 06, 9:40 PM I learned something there, I didn't know that the A/C discharge line went though the inner fender. I thought it went through the core support. That's why I haven't had my right side powdercoated yet, I'll have to discharge the A/C & remove the hoses to take it out. :mad: BillL Mr69 Sep 25th, 06, 9:56 PM I learned something there, I didn't know that the A/C discharge line went though the inner fender. I thought it went through the core support. I replaced the plastic inner fenders on my 69 with metal ones. Who says you can't teach an old dog new tricks. 1969 A/C lines go thru the core support. 1968 goes thru the inner fender. This makes 1968 Chevelle RH inner fenders specific for A/C. Several years ago I watched a pair of 1969 NOS plastic inner fenders go on eBay for big $$$. I have yet to see another pair. Johndel Sep 25th, 06, 9:59 PM Does anyone make reproduction plastic inner fenders for a 69. I have a set if your interested. I changed them out for metal and painted them. gonracn Sep 25th, 06, 10:02 PM Thanks for the replies. i see that year one has them, I hope the fit is ok. Dean Sep 25th, 06, 10:14 PM Hope they do fit OK, good luck. -------------- Only problem is, this old dog won't remember it :( what the heck are you going to do with all thoses nail clippers Nate? | ||