Where can I get the screw in trim studs? I've seen them before, but I can't find any place to buy them!

Try this site:
be patient it takes a long time to down load and you need arkobat reader.
hope this helps? http://www.mrgusa.com/fasindex.htm
T.C.

You need a vendor that sells Au-Ve-Co (or something like that), they have exactley what you want. You may have to buy a box of 100 but that's less than $10.00. The threads have sealer on them to prevent rust after screwing them in. Email me if you can't find them locally.

------------------
Never be afraid to try something new.
An amatuer built the Ark,
Professionals built the Titanic.
Team Chevelle Gold #33
ACES Member #02913
Rode shotgun in the ONLY Z16 convertible made.

Never knew of that Co. Tom. Any more info would be appreciated.
I have purchased just the screws from
Don's East Coast in Lindehurst NY. I dril a pilot hole and put some RTV on the screw B-4 installing.
IF you can't find anything with Tom's info try Don @ 516-226-7982


------------------
Wayne
ACES 1556
TCG 186
So many Mustangs
So Little Time

WayneK, Their website is [URL=http://www.auveco.com. E-mail is mail@auveco.com. They are located in Covington,KY. Most autobody supply stores carry their products.

[This message has been edited by deejay (edited 08-07-2001).]

I don't see the trim studs anywhere on their website!! Am I blind???

They have a lot more stuff than that website has to offer. Let me help on the link.
http://www.auveco.com
It may be best to give them a call. I may still have a catalog to find the part number.

------------------
Never be afraid to try something new.
An amatuer built the Ark,
Professionals built the Titanic.
Team Chevelle Gold #33
ACES Member #02913
Rode shotgun in the ONLY Z16 convertible made.

Ricks first generation camaro sells them.Should be the same for chevelles.