Thought I would share some of my excitement of finding my build sheet. I bought 2 what I believed to be 70 SS cars in Oklahoma earlier this summer. One was built in Leeds and one in Van Nuys. The Leeds car was more complete so I've spent more time on it, The van car I was planning on selling to help pay for the other one. Had the van car in the shop today and after reading some posts here about build sheets on the tank, I thought I had nothing to lose, so down it came. On top was about 90-95% of the sheet intact, just dirty, used a soft paint brush to dust it off..car was a 396 350hp, automatic,a/c.disc brakes, green on green, white stripes, white roof...I took pics but I'm having a hard time getting them loaded.... So now I either sell it, build the other car or keep and build later....I think i called a few buddys as well to come have a look at the sheet because its really in good shape except for 1 corner....

:thumbsup: 396/350 a/c car! I'd keep it.

the other car is also a 396/auto a/c, also green on green but stripe delete, just havent found build sheet anywhere in the interior yet, not sure if Leeds cars put them on top of the tank, guess i'll be finding out

You're in Canada. Were the cars originally sold in Canada? If so, you have another source for obtaining information about how the car was originally built. Someone please provide the link.

Leeds, look inside front fenders. Shine light into the hinge area, they were taped to back of fenders.

For a Canada car go to this site. There is a phone number for Canada cars and you can get a verification sheet. You lucky bastard. http://www.chevellestuff.com/index.htm

hey Dave---Dave here from Cambridge(talked to you a few years back) nice score--just curious if you have any front 1 1/4" sway bars kicking around?keep on cruisin-Dave.

Hi how are you, i might have one around i'll have a look...the leeds car had no front clip on it, so dead end, looked everywhere in the interior but no luck, i was thrilled just to find the other one, showed it to couple people today and they were sayin its one of the best they've seen for sitting on top of tank for 37 years, ill send the pics when i can figure it out

Thought I would share some of my excitement of finding my build sheet. I bought 2 what I believed to be 70 SS cars in Oklahoma earlier this summer. One was built in Leeds and one in Van Nuys. The Leeds car was more complete so I've spent more time on it, The van car I was planning on selling to help pay for the other one. Had the van car in the shop today and after reading some posts here about build sheets on the tank, I thought I had nothing to lose, so down it came. On top was about 90-95% of the sheet intact, just dirty, used a soft paint brush to dust it off..car was a 396 350hp, automatic,a/c.disc brakes, green on green, white stripes, white roof...I took pics but I'm having a hard time getting them loaded.... So now I either sell it, build the other car or keep and build later....I think i called a few buddys as well to come have a look at the sheet because its really in good shape except for 1 corner....

I'm curious...........
Does your Leeds car, have the "L" on the bottom line of the cowl tag ???????.......Don.

and i've decided to sell the car, already have to much into the other one to stop now, so this one will still go...

yes. the leeds car does have the "L"

Nice to hear from you-did you make it to the Barrie swap meet?Let me know info on that chevelle you plan to sell a guy a work has been hounding me to find him a chevelle -I will pass the info on to him--let me know if you find that sway bar--are you going to waterdown in a few weeks -it is a great swap meet and car show--have a good weekend-keep on cruisin--Dave.

send me a pm and ill get you the info, thanks