I bought a set of polygraphite body mount bushings from p-s-t but the kit did not come with any of the steel sleeves or the washers with sleeves. Does anyone know where I can get the body mount sleeves seperate from the bushing kit?

My kit from p-s-t came with everything but the bolts. I would contact them and see if they can get them to you.

thanks for the reply. I called them earlier and they told me that I would need to look elsewhere. Surprising really....

Good Luck! & Thanks

I guess they changed their kits. You could try the restoration places like NPD, OPGi, our sponsor, etc. You could also go to the hardware store, but I hate piecing crap together. It takes time away from actually working on the car. Good luck finding them.

Do you need the sleeves? I bought a kit from Art Morrison and it didn't have the sleeves or instructions.............

Originally posted by Rumblin70SS:
Do you need the sleeves? I bought a kit from Art Morrison and it didn't have the sleeves or instructions............. that's exactly what happened to me. yes, I do need the sleeves and the special washers that have built in sleeves. Thanks for the help

Originally posted by gogoat:
I bought a set of polygraphite body mount bushings from p-s-t but the kit did not come with any of the steel sleeves or the washers with sleeves. Does anyone know where I can get the body mount sleeves seperate from the bushing kit? If I'm not mistaken, the poly bushings don't use sleeves. They are only used for the factory rubber type bushings. Run a bolt through a bushing and see if you think there's enough room for a sleeve. But, if you have to have 'em, check OPG. They have the hardware kit.