|
TonyZ Jul 7th, 01, 8:15 AM I am in the process of stripping out the sealer between the roof and the roof drip edge. What do I replace it with that will allow the paint to adhere properly? ------------------ Tony Z Team Chevelle Gold Member #358 Utica, NY '67 Chevelle SS 454/TH400 ready for paint and new chrome azumpano@a-znet.com Brenden Saylock Jul 7th, 01, 11:15 AM Windshield urthane is the way to go. Don't crack peel or fall off. It sticks to glass great. You should see it stick to dried epoxy. Its all in the prep work clean clean clean. spray epoxy down let it dry a couple hours. Use masking tape to tape off gutter, add bead of thane smooth with finger pull off tape and your done. Let it dry 4 or 5 hours then epoxy over the thane. I use it in place of all seam sealers wish they made it in single serving tubes. JodySirmans Jul 9th, 01, 3:16 PM Go to paint & body supply and get some seam sealer.. comes in caulking gun tubes. ------------------ Jody Sirmans 71 SS454 ACES TonyZ Jul 9th, 01, 5:44 PM Thanks ------------------ Tony Z Team Chevelle Gold Member #358 Utica, NY '67 Chevelle SS 454/TH400 ready for paint and new chrome azumpano@a-znet.com Brenden Saylock Jul 10th, 01, 3:44 PM Seam sealer dries up and cracks over time. I only use it in hidden areas. Don't get me wrong it has it's place. Dries up, sags in, and cracks. TonyZ Jul 10th, 01, 4:41 PM Thanks again! ------------------ Tony Z Team Chevelle Gold Member #358 Utica, NY '67 Chevelle SS 454/TH400 3:73 posi (here's a black and white until it's done) http://www.zumpano.net/67chevelless3a.jpg In the shop and slated for finishing later this month (July 2001)- yee ha! Looking for a '70 - I have a motor and tranny ready. azumpano@a-znet.com | ||