Is this molding glued on? I reached inside the back quarterpanel and didn't feel any studs. I'm going to paint the truck and want to remove the molding?



http://www.s10forum.com/forum/attachment.php?attachmentid=85118&d=1155761957

your link wont allow us access :(

I found out they are glued on. What's the best way to remove them?
http://www.bigblock67chevelle.com/trima.jpg

take your time!!! find one of those cheap retractible utility knives that you can get the blade to come out about 2 inches work it along the top then do the same on the bottom DO NOT PULL ON THEM they have a metal frame inside it that you will distort if you try to pull them off. then have fun getting the doubble sided tape glue off i used a 3m pad on a grinder to get the glue off good luck

My buddy uses a wide (2 inch or so) thin putty knife and a rubber mallet and has moldings off within seconds... he starts on one end and works to the other end...horizonally.