I'm simply verifying that what the paint guy told me was correct.. i don't trust any advice from that place..

the PPG epoxy primer... 2 parts primer:1 part catylist

PPG filler primer... 5 parts primer:1 part activator.

and how much reducer? the guy sold me a gallon... i can't imagine it taking very much of the stuff?

also, what pressure should I shoot it with in a siphon feed gun?

[This message has been edited by Huck2020 (edited 05-11-2001).]

Here Huck, all the info you will need! http://www.ppg.com/cr-refinish/phase1/frmProductInfo.asp Dave

They have sheets that go with that stuff. The paint shop guy should give them to you if you ask. They cover every detail about the material they're selling you. At the very minimum you should receive an MSDS (material safety data sheet) so you know how to protect yourself from whatever hazards these chemicals may expose you to.

------------------
My Elky Page (http://www.geocities.com/chadjlandry/index.html) (updated 5-1-01)
"Think for yourself. Don't let popular opinion make your decisions for you."
Chad Landry
TC Member #643
ACES Member #04556
'68 El Camino