I need a new valve (the one that holds the ceramic tip for my pressure blaster. Where is a good place to buy one ? thanks, Jay

Eastwood has them. www.eastwoodco.com (http://www.eastwoodco.com)

thanks BlueSS454 ,I called Eastwood today . They told me they don't sell the valves anymore.

Try out TIP them or see if Matco or Snap on can get them. You would also be suprised what a local NAPA dealer can order too.

Those valves are usually general on/off lever valves used in plumbing. I would go to Home Depot, Lowes, or your local hardware store. I don't think there is anything special about the valves. Good luck

TP Tools are sandblast specialists. I bought all my parts from them. fair prices. www.tptools.com (http://www.tptools.com) I think

If you're talking about the pistol grip looking valve and not the plumbing ball valve, you might try your local auto paint store.
I think mine still carries them anyway

If you have a harbor freight store in your area they have a gun with a deadman trigger for about $15.I got tired of wearing out the cheap ball valves.

looks like I'll be looking for a whole unit. Thanks everyone