I had replaced my pan under the rear seat and the pan got misplace and possibly tossed, before I could get the nuts that are welded to the pan for the seatbelt bolt off. Is there a source for these? I check the common places GU,YO, and NPD and saw nothing in the catalogs. Also, I need a square nut for the firewall body mount bolt. Please advise.

or could I weld a regular nut on...

It's a square chunk of metal isn't it?

You drill and tap a piece of scrap.

That's what my solution would be for the front, although I was concerned that it was hardened. For the seat belt things, since it is a safety item, I was hoping for the real thing. Not that mounting the body doesn't have to be safe.

I found this place on the web if anyone else has this concern for the seat belts. :D
http://www.andoauto.com/hardware.htm
Still don't know about the body mounting nut for the firewall, whether it is hardended... :confused:

I order the seat belt reinforcements from Wesco http://shop.store.yahoo.com/wescoperformance/index.html and the body bolts I cut a plate into 1 inch square and tapped it 7/16-14 and will weld it in. Hope th is helps in the future for someone... tongue.gif

Joe

The bolts and nuts that I got with my bushing kit (can't remember if it was GU, OPD or whatever, weren't hardened.
Are you in Steubenville, or closer to Pgh?

Russtea2-I sent you a message-check your profile.