I have all the bolts out that go up around the wheel housing but there are 3 bolts that are on the radiator core support, they have square nuts on them. I figured maybe they are reverse threads, but maybe not. Anyways I can't figure how to get these out. Any help?

Reverse threads? Not. Soak them overnight with some PB blaster then use a 1/2 drive socket on them.If that doesn't work try to heat them,as long as your inner wells are not plastc.As a last resort you could always try to break the clips and buy new ones when you reassemble it.

they should break loose with some penetrating oil and persuasion but if you use to much you wiil snap the bolts out of the radiator support heat will work but may also do damage to the paint they are standard threads

------------------
www.bobdefalco.com (http://www.bobdefalco.com)

Figured they were just regular bolts, thanks for the replys.