The new combo:

engine: 4 bolt 350 now 383
bottom end: All forged 4340 Scat stroker crank, (h- beam rods 6in.), mahle forged pistons
heads: Dart iron Eagle 180cc, 64cc comb.
cam: lunati 268
intake: edelbrock per. rpm
carb: 750 holley double pumper

rear end: 3.55 gears, auburn pro series

trans: th350, 3500 stahl

On hoosier quick time pro slicks

any guesses on what it will run, mid 12's?
Also the car will have at least a 150 shot on it any guess on spray?

thanx
evan

12.90-13.20
Depending on how well the suspension works...

Yeah, probably 13 flat on motor if everything else works well. Figure .7-.8 quicker on spray again if the rest of the car is up to it.

A Friend Of Mine Has A 70 Malibu With A 350 All Cast And Less Compression Than My Motor, 2500 Stall, 3.27 Gears (my Motor 10.7 To 1) And He Runs A 13.10 Spinning Through First Gear On Street Tires, Thats A Full Bodied, All The Enterior. So How Can You Say My Motor That Makes Tons More Power Than His Is Only Going To Put Me Into The High 12's Low 13's?? The Car Is All Done And Done Right All New Suspension Last Year.

Thanks

Evan

The only way to know is to take it to the track. Too many variables!

What cmt454 said.

quat•er

Pronunciation: (kwat'ur), [key] (http://www.factmonster.com/pronkey.html)
—adv.
(in prescriptions) four times.

So quater mile time = 4 miles, right? From a standing start, I'd guess 127 seconds or so.:D


J/K:waving: