What thinner will clean your spray gun up after this. I have tried to clean this up after just using a brush, sure aint easy!!

I just used lacuar thinner.Don't let the stuff dry tho it's a bi##@ to get off then.
The cheap stuff from the hardware store.
Rick

------------------
66 300 Deluxe 350/330hp
72 Elcam 402SS---soon to be a roller cammed 454

por solvent works also but make sure you disassemble the gun and clean it i have a cheap extra gun to spray the stuff

ACETONE!

Works great, and doesn't mess up the gun. Run the gun for about 30 seconds after it stops spraying out the acetone, pop the cap and let it air out.

Use a respirator!


------------------
Team Members Forever #341

Richard, Judy, MAXX2

'69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi., Full Aluminum Bed With Full Tubs, Aluminum Firewall, Custom Aluminum Dash/Gauge Bezel.

If you have allready sprayed and are now asking this question it is too late. Throw it away and start over.

If you are asking this queastion before spraying... I reccomend laqure thinner. Just buy the cheep stuff for cleaning. As mentioned dissasemble the gun and have a good variety of brushes. (They make gun cleaning brush kits). DO NOT let the POR15 dry before attempting to clean...Clean imediatly after spraying and inbetween coats.

Also be extremely careful for yourself with pleanty of fresh air available and proper respiration equipment and protective clothing. DO NOT allow back spray into your eyes!

Oh... Don't forget to try and have fun. Seriously this is not a fun job. Be careful.

------------------
FastSS396Man
Brian

Fastss396 (http://chevelles.com/showroom/fastss396manflqtr3.jpg), Fastss396 (http://chevelles.com/showroom/fastss396manflqtr2.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manrrqtr3.jpg),
Fastss396 (http://chevelles.com/showroom/fastss396manint1.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manint2.jpg),Fastss396 (http://chevelles.com/showroom/fastss396mantrunk2.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manfrchassis.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manexh.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manengine1.jpg),Fastss396 (http://chevelles.com/showroom/fastss396manrchas1.jpg)
69' SS396 Chevelle
L78 396/375hp
M-21 Close Ratio
Cortez Silver
10 year Resto
It's brand new again!
02' Harley FatBoy, Diamond Ice Pearl and lots of chrome!
ACES# 3466

another one here for acetone. buy it by the gallon in any hardware store. work wonders on anything por-15 gets on. you just have to get it cleaned ASAP do not let it sit. if it sits too long i think paint stripper might work but i doubt it. por-15 thinner is expensive and i only use it to thin por-15 for spraying.

------------------
I couldn't repair my brakes, so I made my horn louder.
Just let me apolagize for my spelling right now!
www.EINSTYN.com (http://www.EINSTYN.com) TC Gold#1460, VCEA#2, SCPC#44
68-72 Wagon resto & mod info, parts & sales.