I've chosen to install an MSD Pro Billet 8366 distributor into my MPFI equipped 540 BBC. The Holley Commander 950 ECU will control the timing of this distributor and the wiring harness from the Holley kit connects to the 4-pin port on the MSD, but now I'm left with the 2-pin port to connect to the coil. It takes a funny-shaped weatherpak connector that MSD tells me I need to swipe from a donor car.

Does anyone out in TC Land use this very unit (the MSD 8366 distributor) and know where I might locate a 2-pin plug or know the correct donor car so I can hook up my coil? Thanks!

It takes a funny-shaped weatherpak connector that MSD tells me I need to swipe from a donor car.

If they are standard weatherpack connectors, Summit selll them


http://store.summitracing.com/partdetail.asp?autofilter=1&part=PRF%2D70402&N=700+115&autoview=sku

If they are standard weatherpack connectors, Summit selll them




That's the problem....the plug is a very small, 2-pin connector like a coolant sensor would have. I think I may have found one on-line...we'll see if it fits when it arrives. Thanks!