We just purchased a 70 chevelle malibu 307. EVERYTHING is in immaculate condition. The door chime still works when the keys are left in & door is open. The only problem we can find is that the windshield wipers work and the fluid comes out, but it seems the lines have been cut. The lines were stuffed down into the cowl, but the fluid is coming out. How do we hook them back up to the wipers themselves. Like I said, the ends have been cut & they don't reach the wipers. Any suggestions or pics might help of what they are suppose to look like when hooked up correctly. Thank you!!

We just purchased a 70 chevelle malibu 307. EVERYTHING is in immaculate condition. The door chime still works when the keys are left in & door is open. The only problem we can find is that the windshield wipers work and the fluid comes out, but it seems the lines have been cut. The lines were stuffed down into the cowl, but the fluid is coming out. How do we hook them back up to the wipers themselves. Like I said, the ends have been cut & they don't reach the wipers. Any suggestions or pics might help of what they are suppose to look like when hooked up correctly. Thank you!!

they don't connect to the wiper. they connect to squirters attached to the rear of the hood.

where abouts are the squirters & what do they look like? I've looked under the hood & don't see anything resembling a "squirter". Does it squirt thru the cowl vents in the hood (not the cowl induction hood)??

They should look something like this:

http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=NT-612&Category_Code=

The ones in the link are for an SS hood, but the Malibu ones should be similar.