This question goes out to all of you running the HR Parts anti-roll bar, will it fit will a full exhaust? I have Torque Tech 3" tail pipes and its hard to tell from the pictures on the site if the links will clear where the tail pipes exit the mufflers and go up and over the rearend. Thanks for the help.

Can't say for sure but the fit will be close.
Gonna find out real soon. In the process of installing 3" tails on my '70. What makes things worse, I've got Koni coilovers too.
We've put it up on a rack and it looks like (with some pipe bending) the tails should fit.
Now, when it all gets back on the street...who knows what clearance issues will arise. I'm hoping it will work. Getting real tired of the turndowns blowing dust around. :(
Stay tuned...

The HR Parts bar just barely clears the 3" Torque Tech Exhaust I have.

I had to remove the rear factory hangers :( and will be rigging the mufflers up with a universal type hangar somehow later today. I tried racing with it last week without a rear hangar muffler and it just caused some problems with the tail pipes loosening up and twisting slightly. Plus the increased stress on the collectors isn't the best.

I have the HRP bar on my 66 and just installed a Stainless Works 3" system with factory style tailpipes the bar did not create as much of a clearance problem as the upper control arms .they are close but no problems did not use factory hanger FWIW

hopefully ill let you know later, going to try this evening and install it. If you would like to come by and see or help haha ill email my phone number to ya im in topeka too. chris