Is it that difficult to find a manual brake rod for my 69 chevelle? I have done a search and tried the restoration catalogs. Any ideas? Do you have one you want to let go? Thanks,

pretty common should be the same up to 72, just try to find a 4 door no option donor car. should be pretty plentiful. Jim

Thanks for the reply Jim. I'd rather not buy a whole car to get 1 part if I can help it. Any other ideas?...anyone?

Ads are not allowed in the forums :clonk:

Don't know what a manual brake rod is but you can probably find one with a little better discription if you post an ad in our FREE classified secion here.
http://www.chevelles.com/classifieds/

Thanks Dean, sorry about the post but I tried in the wanted section with no luck. The rod is the one connecting the brake pedal to the master cylinder. Thanks anyway....

I have one i did a conversion and put a new master cylinder in.I had a 72 power rod i had to use because the manual one was too long.let me know ,ill look for it today.

Hi Steve, that would be great! Let me know if you find it and how we can get it here. THANKS!

Hey i just got back in tonight ill look for it in the morning.i hope this is what you are talkin about its the round rod with a a fork bracket for a pin it goes through the fire wall connecting the brake pedal bar to the master cylinder just making sure!

Yes, you are correct. Just let me know and Thanks....

Whoops, I didn't mean get a whole car, what I did was when I was junkyarding I spotted a 4 door and grabbed the kick panels and while I was under there I noticed it was a manual car so I just grabbed the rod also, since I went with a later manual disc master and it came with the wrong rod. Jim

I just converted to manual brakes, and didn't have time to check the wrwecking yards (not much old stuff anyway)... I got a new one from Master Power brakes...

$20+ with shipping... Of course, now I am bound to find one in my junk collection...

I just converted to manual brakes, and didn't have time to check the wrwecking yards (not much old stuff anyway)... I got a new one from Master Power brakes...

$20+ with shipping... Of course, now I am bound to find one in my junk collection...


I used one from Master Power Brakes also! :thumbsup:

Thanks for the great replies! Steve is being so kind as to give me one for free (wooohooo) Thanks again Steve and for the support on this site. Is hot outside or what....