Any thoughts on what coil springs to use. Should I purchase new stock spring or is there something better out there? I have seen the 1 and 2 inch drop springs and possible would like to see the car sit a little lower but just don't have alot of experience in this area.

Thanks for any suggestions you may be able to offer.

Also: Any suggestion on shocks. Tks...

The problem with drop springs is that they have to increase the gauge of the spring itself to limit the articulation of the control arm due to the reduced space or travel.
This of course also makes the ride much harsher.

If your intention is to lower the car, I would strongly recommend going to "drop spindles" 'first'.

If your intention is to just replace the springs, I found that Year One offered a set specific to your car and its options. They state that they are manufactured to the original specifications, and that the ride height would be as it was originally.

I purchased this set and am pleased with it.