I am going a bit crazy here and I really need some help. My front body mounts are basically shot and I can't seem to find a replacement source. I guess I could fabricate these pieces if I absolutely had to, but I would truly like to use exact match 'new' replacements. For clarificataion, if needed, these brackets are welded to under side of the toe boards and run up to the lower firewall area on both sides. (side note: they have a smaller bracket welded on the inner side that contain two mounting nuts [welded] for something [not sure what]) Any way the body mount bushings go into the main brackets and then mount to the frame just a beneath the firewall area. I have searched Ausleys, Ground Up, Year One, Goodmark, etc. but I cannot find any replacements. Any and all help/advice is appreciated. Thanks
Tim

You will need to find a donor car and remove these parts. I doubt that anyone makes new ones.