Hi, I'm getting ready to repair a place under the back seat on my 67 chevelle.It has some very small pin holes in it,the largest is about the size of a pencil eraser.Would por patch putty or the power mesh cloth work ok or do I need to fix it another way? P.s The area i'm fixing is about a 5-6". Thanks Daryl

i had the same thing going on in the trunk of my 67. hundreds of them, pin holes though. i cleaned to bare metal both sides. then i put a piece of duct tape on the bottom side and applied allmetal, and sanded down. then i applied a layer of dynaglass over that and sanded. the interior was shot with dp90 and the exterior had por 15 applied over it. pics on my site. Dave http://www.cardomain.com/id/sheetmetal